COMM-connect A/S

The COMM-connect 2-to-1 E-TETRA combiner allows for two stations to utilize one antenna. The combiner is equipped with BNC female connectors, which makes it very easy to install in any type of installation. Mechanical mounting is made easy by mounting flaps protruding the casing.Features of the COMM-connect combiner:2 stations on 1 AntennaEasy mountingCost effectiveLight weight Rugged housingApplicationsPolice carsFire TrucksMilitary vehiclesCritical Communications

The COMM-connect 2-to-1 TETRA combiner allows for two stations to utilize one antenna. The combiner is equipped with BNC female connectors, which makes it very easy to install in any type of installation. Mechanical mounting is made easy by mounting flaps protruding the casing.Features of the COMM-connect combiner:2 stations on 1 AntennaEasy mountingQuick connect BNCRugged housingCost effective Light weight Rugged design

The combiner is supplied with a choice of 4 different connectors, making it very easy to fit to any type of installation. The mechanical assembly is facilitated by the use of a 19″ housing.To be used when more than one transmitter can utilize one antenna and cable installation. These units can be used with duplex filters to form multi channel systems on a single antenna.Features2 stations on 1 Antenna VHF bandsLow intermodulationN transmitters one antennaHigh Isolation, Low insertion loss

The 3-way VHF combiner COMM-connect enables one antenna to be used by three stations. The combiner is delivered with a selection of 4 different connectors, which makes it very easy to adjust to any kind of installation. The mechanical installation is simplified by using a 19″ housing.Features3 stations on 1 AntennaEasy mountingLow intermodulationHigh isolation, Low insertion lossApplicationsMultiple system on one AntennaEasy mountingLight weightMulti channel systems

The COMM-connect 4-to-1 E-TETRA Combiner lets you use four stations with one antenna. The combiner is equipped with BNC female connectors, which makes it very easy to install in any type of antenna. The Combiner installation is simplified by the flaps protruding from the housing.advantages of the COMM-connect combiner:4 stations on 1 AntennaEasy mountingQuick connect BNCCost effectiveLight weightRugged housingApplicationsPolice carsFire TrucksMilitary vehiclesCritical Communications

The COMM-Connect 4-to-1 TETRA combiner enables four stations to be used with the same antenna.The combiner is equipped with BNC connectors, which makes installation in any type of application very easy. The installation is made easier by flaps on the housing.Features of the COMM-connect combiner:4 stations on 1 AntennaLight weight robust housingCost effectiveEasy installation

The COMM-connect 7010 Batwing Antenna is an omnidirectional horizontal polarized antenna for UHF TV Band IV and V, with again of 2-3dB. The Antenna is housed in a rugged radome in order to withstand severe weather conditions. All mounting hardware is stainless steelOmnidirectional DVBT Antenna for extreme weather conditionsHarsh weather broadcastUHF bandsArctic / Rural installationsRugged design Wind shear: 70m/s (136 kt.)

The COMM-connect GPS Repeaters allows for indoor GPS coverage where critical operations are depending on GPS data. The GPS Repeaters is equipped with N female connectors and an internal , which makes it very easy to install in any type of installation. Mechanical mounting is made easy by mounting flaps protruding the casing.FeaturesGain adjustEasy mountingN connectorsRugged housingOscillation LEDApplicationsTest labsPolice car depotsFire stationsParking facilities & Garages

The CC3018 SafeOne is a RF Safety Monitor covering the requirements set forth in WHO ICNIRP specifications. It has a very wide frequency range covering 30MHz to 10GHz, which makes it suitable for use in almost all antenna installations. Due to the innovative lightweight design, technicians can wear this at all times, without the need to constantly be observant the state of the instrument. The SafeOne is powered with standard batteries, with 250 days of continuous operation. Applications / Features:BeltclipLightweight & Rugged designCost effectiveRadiation displayPersonal safety for: Mast site technicians, WLAN engineers, PMR technicians, Rooftop workersFunctionsProfessional & Public exposure limitAudible AlarmSilent modeLiquid crystal displayCompliant to WHO/ICNIRPBattery operatedLED AlarmShaped frequency response: WHO / ICNIRP, US FCC 96-326, Canada Safety Code 6, EU directive 2013/35/EU 

COMM-connect 4-way short-wave receive coupler for distribution systems in which many receivers use one antenna system. Supplied with a choice of 4 different connectors, making it very easy to adapt to any type of installation. Mechanical installation is facilitated by the use of a 19″ housing.FeaturesHigh dynamic rangeLow Noise amplifierHigh isolationBurnout protectedBuilt in 12VApplicationsMultiple receiversLight weightMulti channel systems

The COMM-connect 3013 SWR TRUE Antenna Analyzer covers all important communication bands from 30 MHz - 2700 MHz. The Results will be displayed graphically as VSWR or Return Loss plots. The internal operating system can be used to control the measurement, display and I/Os. In addition, serial communication with the PC, USB memory card and USB serial communication is possible. For documentation reasons, the device has a real-time clock. Multi-layered menus are used to set up and control the operation of all parameters. The SWR True Instrument is compact, portable and lightweight and is operated by a battery, with the internal NiMh cells working for more than 6 hours in constant use.  Frequency range: 30 - 2,700 MHzResolution: 20 kHzaccuracy: +/- 20 ppmconnections: N femaleMax. input power: 100 mW or +20 dBmMeasuring range: 0 - 30 dB or VSWR 1:1 - 9:1interfaces: USB / RS232Operating time: > 10 hoursMeasurement capabilities: VSWR of antennas and cablesBox contents:1 x 3013, 1 x Manual,1 x Wall adapter, 1 x USB Memory Stick

SiteOne Cable & Antenna Analyzer from COMM-connect is a small handheld analyzer which covers all major communication bands from 50 kHz to 4400 MHz. Within the Analyzer are a lot of measurement screens available, in order to cover all possible parameters of an antenna installation.The COMM-connect Antenna Analyzer has a large Storage which can hold years of measurement data and can be connected via USB to a PC. Frequency range: 50 kHz - 4.4 GHzResolution: +/- 2.5 ppmconnections: N female interface: USBOperating time: 4 hoursbuilt-in real time clockMeasurement capabilities: VSWR, S11, S21, Distance to FaultBox contents:1 x 3028, 1 x Manual,1 x Wall adapter, 1 x USB Cable